Guides / Brewing

Chemex Guide: How to Use One, Step by Step

To use a Chemex, fold its paper filter so the thicker, multi-layer side sits against the spout, rinse the filter, add coarsely ground coffee, wet the grounds with a small bloom pour, then pour hot water slowly in spirals until you reach your target. A good starting ratio is about 15 g of coffee to 240 g of water. This guide gives amounts by size, a step-by-step recipe with scale readings, and fixes for sour, bitter or slow brews.

Chemex at a glance

What it is A one-piece glass pour-over brewer with a paper filter in its funnel neck
Grind Coarse to medium-coarse, about like kosher salt
Ratio About 1:16 (15 g of coffee to 240 g of water)
Water About 93°C (200°F): boil, then wait about 30 seconds
Bloom A small pour, about twice the coffee's weight, for 30 to 45 seconds
Pours Slow spirals, in two or three batches
Finish Lift the filter out and serve

What is a Chemex?

The Chemex is a glass coffee brewer made of borosilicate glass, wood and leather, designed in 1941 by Peter Schlumbohm, a chemist who moved to the United States from Germany in 1935. The Museum of Modern Art says he approached coffee like a scientist, and the shape of the brewer draws on laboratory glassware: the Erlenmeyer flask. It sits in the museum's collection. In use, it is a pour-over brewer: you pour hot water over coffee in a paper filter, and the coffee drips into the glass below.

How much coffee for a Chemex?

At about 1:16:

Size Coffee (weight) Coffee (spoons) Water Bloom
One mug 15 g 3 tablespoons 240 g 30 g
Two mugs 30 g 6 tablespoons 480 g 60 g
Three mugs 45 g 9 tablespoons 720 g 90 g

One tablespoon of ground coffee is about 5 g, so a scale is more accurate than spoons. Check how much your Chemex holds before choosing a row, and keep room at the top. Food52's recipe uses more coffee (42 g) with no stated water weight: it pours until the coffee reaches the glass button on the side of the brewer. If you want a stronger cup, use a little more coffee for the same water and keep everything else the same.

How to use a Chemex, step by step

  1. Heat the water to about 93°C (200°F), or boil it and wait about 30 seconds. Food52 uses 200°F; the National Coffee Association gives 93°C, plus or minus 3.
  2. Fold and place the filter. Open it so one side has three layers and the other has one. Put it in the neck with the multi-layer side against the spout. Food52 says to line the folds up with the spout.
  3. Rinse the filter with hot water. Food52 says this seals the paper to the glass and removes the paper taste. Pour the water away and leave the filter in place.
  4. Grind and add the coffee. Grind coarse, like kosher salt, and add the coffee. Level the bed gently by shaking the brewer.
  5. Bloom. Pour twice the coffee's weight in water (60 g for 30 g of coffee), spiraling to wet all the grounds. Wait 30 to 45 seconds. Food52 notes that fresher coffee blooms more.
  6. Pour in batches. Pour in slow spirals up to about 270 g on the scale, wait until the water has mostly drained, then pour up to 480 g.
  7. Let it finish dripping, then lift the filter out and throw it away. Food52 suggests warming your mug with hot water first.

For timing, watch the water rather than the clock. If the bed stays flooded for a long time, or the coffee tastes harsh, grind a little coarser next time.

The scale readings, for two mugs

Step Water added Scale reads
Bloom 60 g 60 g
Wait 30 to 45 seconds none 60 g
First pour 210 g, in slow spirals 270 g
Wait until most of it has drained none 270 g
Second pour 210 g, in slow spirals 480 g

These amounts follow the 1:16 ratio and a bloom of twice the coffee's weight, as the National Coffee Association advises.

What the paper filter does

The National Coffee Association says paper filters absorb more of the coffee's oils than metal or cloth ones, which gives a lighter, cleaner cup. That is why Chemex coffee tastes different from a French press, which lets the oils through. See our French press guide for that side of the comparison.

How to fix a Chemex cup

If it tastes or acts like this Likely cause Try
Sour, sharp or thin Under-extracted: grind too coarse or water too cool Grind a little finer, and check the water is about 93°C
Bitter, dry or flat Over-extracted: grind too fine Grind a little coarser
Weak or watery Ratio too wide Use a little more coffee or less water
Drains very slowly Grind too fine, or too much coffee for the filter Grind coarser or use less coffee
Paper taste The filter wasn't rinsed Rinse it with hot water, then throw the water away

Chemex FAQ

What grind size should I use for a Chemex?

Coarse to medium-coarse, about like kosher salt. If you order from us, choose the "Pour over" grind.

How much coffee do I use for a Chemex?

About 15 g of coffee for 240 g of water as a starting point, or 30 g for 480 g. Food52 uses 42 g for a full brewer.

What water temperature is best?

About 93°C (200°F). Breville gives a range of 195 to 205°F.

Do I need to rinse the Chemex filter?

Yes. Food52 rinses it to remove the paper taste and seal it to the glass, and the National Coffee Association says the same.

How long does a Chemex take?

It depends on the size and grind. If it drains much more slowly than your usual pour-over, grind coarser.

How do I clean a Chemex?

The National Coffee Association says to clean the brewer after each use. Throw away the used filter with the grounds and rinse the glass.

Is a Chemex better than a V60?

They are different. The Chemex uses a thicker paper filter and a larger glass carafe, so it suits two or more mugs.

From our shop

Want to taste it?

A Chemex's paper filter gives a clean cup, which suits a lively, fruity coffee. Wild Vine is our anaerobic Yemeni coffee from Haraz, with notes of juicy fruit, strawberry and apple. For something softer and nutty, try Rooftop Sun. Choose the "Pour over" grind when you order. Browse all our coffees.

Shop all coffees

More guides

All guides →